POLYFLUX VE is a vegetable flux for the realization of cold-workable bituminous conglomerates. Cold-workable bituminous conglomerates are used for road maintenance Cold-workable bituminous conglomerates are produced using low-temperature asphalt plants by mixing: bitumen, selected aggregates and the additive POLYFLUX VE which guarantees cold workability.
After filling the hole this is immediately passable. The bituminous conglomerate quickly hardens with the passage of traffic.
POLYFLUX VE can be used with aggregates between 3-6 mm or 4-8 mm (also derived from milled), it is also possible to add sand 0-4 mm up to 10-30% on the total weight of the aggregates.
METHOD OF USE
1) Put the aggregates into the mixer first (T = 80-120 ° C), then add POLYFLUX VE;
2) After 5-10 seconds of mixing, add the bitumen and mix for another 15-25 seconds;
3) Then continue mixing for 5-15 seconds;
4) Cool the conglomerate;
5) Pack the conglomerate in bags or store it in accumulation